产品材质Material：

真空镀膜反射器，高纯度铝质反射腔、灯壳及散热体，高强度钢化玻璃罩，大功率LED光源，高效率恒流源。

Vacuum evaporation coated reflector; high-purity aluminum reflection cavity, lamp housing and radiator; high strength tempered glass cover; large power LED light source; high efficiency constant current source.

适用场所Application place：

城市道路，人行道，广场，学校，公园，庭院，居住区，厂区以及其他需要室外照明的场所。

Urban road, sidewalk, square, school, park, courtyard, residential area, factory
site and other places where exterior lighting is needed

产品特点Characteristics：

1．采用自主封装的单颗大功率LED（30W－200W）作为光源，运用独特的多颗芯片集成式单模组光源设计，选用进口高亮度芯片。
2．自主的散热器与灯壳一体化设计， LED直接与外壳紧密相接，通过外壳散热翼与空气对流散热，充分保证了LED路灯50000小时的使用寿命。
3．灯具表面进行了耐紫外线抗腐蚀处理，耐高温发泡硅胶密封，有效防尘防水，整体灯具防护达到IP65等级。
4．采用单体椭圆铝反射腔，配合多曲面真空镀膜反射器，针对性地将LED发出的光控制在需要范围内，提高了灯具出光效果的均匀性和光能的利用率，更能凸显LED路灯节能优点。与传统的钠灯相比，可节电70%以上。
5．无不良眩光、无频闪。消除了普通路灯不良眩光所引起的刺眼、视觉疲劳与视线干扰，提高驾驶的安全性。
6．启动无延时，通电即达正常亮度，无须等待，消除了传统路灯长时间的启动过程。
7．绿色环保无污染：不含铅、汞等污染元素，对环境没有任何污染。
8.可与太阳能结合，充分发挥直流低压工作与节能环保的优点。

1. Single large power LED (30W－200W) encapsulated with the technology provided with intellectual property right is used as a light source; Unique design of integrated single module light source composed of several imported high-brightness chips are applied.
2. The innovative integration of radiator and lamp housing realizes the close connection between LED and housing. The wing radiator and convection of air for radiation will fully guarantee the 50,000-hour service life of LED street lamp.
3. The lamp surface is applied with UV-resistance and anti-corrosion treatment. The high temperature resistant silica gel seal can resist dust and water effectively. Therefore, the protection level of integral lamp reaches IP65.
4. Single oval aluminum reflection cavity is used with multi-curved surface vacuum plated reflector to control the light from LED within a required range, in order to improve the uniformity of light and the utilization rate of light energy. Hence, the advantage of energy conservation of LED street lamp is shown more evidently. The energy consumption of LED lamp is more than 70% lower than that of conventional sodium lamp.
5. Harmful glare and flash does not exist. The dazzling, visual fatigue and sight interference caused by harmful glare of common street lamp is eliminated. As a result, the driving safety is improved.
6. No time delay occurs after the startup. Normal lightness can be achieved immediately after the electrification, so no waiting is needed. The long-time startup of conventional street lamp will not occur any more.
7. Environmentally friendly and pollution free: the lamp is free of contamination elements like plumbum and hydragyrum etc., and will not cause pollution to environment.