产品材质Material：

铝质散热器及反射器，亚克力压盖，PBT白色环保材料灯口座， 多芯集成化LED光源，AC86V-AC265V宽电压范围恒流源。

Aluminum radiator and reflector; acrylic gland; bulb holder made of white PBT environmental material; multi-core integrated LED light source; AC86V-AC265V wide voltagerange constant-current source.

适用场所Application place：

楼道，办公室，学校，店铺，家庭以及其他需要室内照明的地方。

Corridor, office, school, shop, home, and other places where interior illumination is needed.

产品特点Characteristics：

1．采用自主封装的单颗 1W-10W大功率LED作为光源。光源运用多颗芯片集成式单模组设计，选用进口高亮度半导体芯片，具有导热率高，光衰小，光色纯，无重影等特点。
2．使用LED固体光源，没有玻壳、钨丝等易损部件，经得起震动冲击，采用普通E27常用接口，可直接装在常用交流电接口上，使用方便、安全。
3．节能效果明显，功率为3W-7W的LED照明灯，亮度相当于25W-55W白炽灯泡，可节能80%。
4．独特的散热设计工艺使LED光源寿命可达50000小时以上，整体灯具终身不需更换光源，维护费用极低。
5．无不良眩光、无频闪。消除了传统灯具的不良眩光所引起的刺眼、视觉疲劳与视线干扰。
6．LED光源的发光颜色和色温可以灵活选择,可以根据客户需要量身制作,为不同应用环境的灯具设计提供了便利。
7．启动无延时，通电即达正常亮度，无需等待。

1. Single self-encapsulated1W-10W large power LED is used as light source. The light source, composed of single module integrated by several chips made of imported high-brightness semiconductor chip, is featured by high heat conductivity, low brightness decline, pure
light color and elimination of ghosting.
2. Solid LED light source without easily damaged parts like glass envelope and tungsten filament etc. is used to resist vibration and shock. The ordinary E27 interface that can be directly connected to conventional AC86V-265V interface is used for convenient and safe operation.
3. Energy-saving effect is evident. The brightness of LED illuminating lamp with a power of 3W-7W is equal to that of 25W-55W incandescent bulb; hence, the consumption of energy can be reduced by 80%.
4. Designed with unique radiation technology, the LED light source may work normally for more than 50,000 hours. The light source needs not to be replaced for all the service life of integral lamp; hence, the maintenance cost will be terribly low.
5. Harmful glare and flash does not exist. The problems of conventional lamps like harmful glare and the dazzling, visual fatigue and sight interference caused by harmful glare are solved.
6. The emitting color and color temperature of LED light source that can be flexibly selected and adjusted according to the requirement of customer is convenient for the design of lamps used in different environments.
7. No time delay occurs after the startup. Normal brightness can be achieved immediately after electrification, so no waiting is needed. The number of times of turning on-and-off may be more
than one million.